15*10.4cm Water Transfer Paper for Polymer Clay, Magic Transfer Paper for Polymer Clay Jewelry Earring Making Stickers/Image Transfer

Description

1. Condition your clay and roll it onto a ceramic or marble file
2. If needed, cut the paper into desired size, you can use the rest later
3. Lay the paper printed side down on the prepared clay slab
4. Roll the acrylic roller over the transfer paper several times, make sure all the paper is in contact with polymer clay to make the most successful transfer
5. Spray gently with water or run the entire slab under a gentle stream of water,
GENTLY rub the paper away
6. Let your slab dry for a couple of minutes, or gently use a paper towel to pat it dry
7. Use clay cutters cutting out clay shapes, peel off the extra clay
8. Bake the clay pieces as usual, keep in mind that the colors might change slightly while baking
9. After baking you will get a matte result, if you’d like to get more vibrant colors, use glossy vamish or resin for the finish
tips:
1. Use on white or light colored clay (best result)
2. Place the acrylic roller in the middle of the transfer paper and then firmly roll it towards the end in both directions